Instructions for Installing RAPT™

Installing RAPT.

Easy Does It.

See the steps for installing RAPT™ outlined below and refer to the images at right.

Also see our installation video.

 


Installation Instructions

1. Wash hands thoroughly.

2. Use enclosed lint free cloth to clean the touch screen of device. Clean both sides of device if you intend to protect both sides.

3. Peel RAPT™ from its release liner backing.

4. Hold RAPT™ in your hand with the adhesive side facing up.

5. Spray RAPT™ on both sides with CDACS™ (Clear Defense® Application and Cleaning Solution).

6. Place RAPT™ on device with adhesive side facing down. You can slide RAPT™ to easily position it on the device.

7. Use enclosed squeegee to remove the excess CDACS™ and any air bubbles by applying the squeegee from the center of your device to the edges. Any haze or excess bubbles will dissipate over 2- 3 days.

Use the lint free cloth to wipe away any excess CDACS™.

Peel RAPT from its release liner.3. Peel RAPT™ from its release liner.

 

Spray on both sides with CDACS.4 — 5. Spray on both sides with CDACS™.

 

Place on device with adhesive side down.6. Place on device with adhesive side down.

 

Slide to position on the device6. Slide to position on the device.

 

Center RAPT on device.

 

Squeegee from the center.7. Squeegee from the center.